Search
Current Category
APART/BIAMP
Acc. for Mounting Ceiling Speakers - Standard Ceiling Speakers - Water proof Ceiling Speakers 2-Way (HiFi) Ceiling Subwoofers Column Speakers Conference Microphones Control Systems EN 54-24 Certified Loudspeakers Full-Range Passive Loudspeakers Gooseneck Microphones Home/HI-FI AM/FM Tuners Horn Speakers & Sound Projectors Installation & PA Players Installation Housings ETC Installation Mixer Amplifiers Installation Power Amplifiers Installation Pre-amplifiers In Wall Speakers Isolation Transformer Matrix Mixers Multi-Channel Power Amps. Other Installation Accessories Outdoor Wall Speakers Paging consoles & Microphones Passive Subwoofers Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Small Loudspeakers for Installations Speaker Stands Special Speakers Stereo Amplifiers Surround/Satelite Speakers Transformers for 100 V installations Volume Controls & Program Selectors Wall Speakers
Acc. for Mounting Ceiling Speakers - Standard Ceiling Speakers - Water proof Ceiling Speakers 2-Way (HiFi) Ceiling Subwoofers Column Speakers Conference Microphones Control Systems EN 54-24 Certified Loudspeakers Full-Range Passive Loudspeakers Gooseneck Microphones Home/HI-FI AM/FM Tuners Horn Speakers & Sound Projectors Installation & PA Players Installation Housings ETC Installation Mixer Amplifiers Installation Power Amplifiers Installation Pre-amplifiers In Wall Speakers Isolation Transformer Matrix Mixers Multi-Channel Power Amps. Other Installation Accessories Outdoor Wall Speakers Paging consoles & Microphones Passive Subwoofers Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Small Loudspeakers for Installations Speaker Stands Special Speakers Stereo Amplifiers Surround/Satelite Speakers Transformers for 100 V installations Volume Controls & Program Selectors Wall Speakers
Category
Manifacturer
Home
» APART/BIAMP
» REVAMP2150
APART/BIAMP REVAMP2150
Features:
Power Amplifier 2x150W 4Ohm, bridge 300W 8Ohm, class D
The new REVAMP2150 is a professional 2-channel digital power amplifier with 2 x 215 watt output power @ 4 ohms, but is also bridgeable (1 x 300 watts @ 8 ohms). This class-D amplifier is convection cooled without built-in fans which implies that the amplifier is completely noiseless and dust-free at all times.
The unit has multiple speaker and amp protection circuits built inside for DC protect, over current protect, over temperature protect and protection against input overload. During the configuration of theinput gain, the rear clip LED indicator is very useful and handy for a fast and easy installation. Versatile connectivity due to balanced and unbalanced inputs on euroblock or cinch, pass-through outputs on cinch and loudspeaker outputs on euroblock. Housed in a straightforward 1U slim and lightweight design without front control our REVAMP2150 is an amplifier unlike any other in the small and mid-sized fixed install audio market.
Specifications:
• Power amp topology: Class-D
• Output channels: 2
• Output power RMS 4 ohms: 2 x 150 watts, bridged 8 ohms: 300 watts
• Minimum load impedance: 4 ohms; bridged 8 ohms
• Line input(s) balanced: 2 Euroblock
• Line input(s) unbalanced: 2 RCA + 2 pass through RCA
• Output connections: Euroblock
• Frequency Responce: 20 Hz - 22 kHz
• Channel separation: > 70 dB @ 1kHz
• Cooling system: Convectional
• Dimensions: 483 x 44 x 235 mm (including rack ears), 1HU
• Weight: 5.1kg
The new REVAMP2150 is a professional 2-channel digital power amplifier with 2 x 215 watt output power @ 4 ohms, but is also bridgeable (1 x 300 watts @ 8 ohms). This class-D amplifier is convection cooled without built-in fans which implies that the amplifier is completely noiseless and dust-free at all times.
The unit has multiple speaker and amp protection circuits built inside for DC protect, over current protect, over temperature protect and protection against input overload. During the configuration of theinput gain, the rear clip LED indicator is very useful and handy for a fast and easy installation. Versatile connectivity due to balanced and unbalanced inputs on euroblock or cinch, pass-through outputs on cinch and loudspeaker outputs on euroblock. Housed in a straightforward 1U slim and lightweight design without front control our REVAMP2150 is an amplifier unlike any other in the small and mid-sized fixed install audio market.
Specifications:
• Power amp topology: Class-D
• Output channels: 2
• Output power RMS 4 ohms: 2 x 150 watts, bridged 8 ohms: 300 watts
• Minimum load impedance: 4 ohms; bridged 8 ohms
• Line input(s) balanced: 2 Euroblock
• Line input(s) unbalanced: 2 RCA + 2 pass through RCA
• Output connections: Euroblock
• Frequency Responce: 20 Hz - 22 kHz
• Channel separation: > 70 dB @ 1kHz
• Cooling system: Convectional
• Dimensions: 483 x 44 x 235 mm (including rack ears), 1HU
• Weight: 5.1kg
Our Price
BUY NOW!
Availability of this item:
In Stock
In Stock
Warranty: 12 months
Продуктът е наличен в
• София, Централен склад бул. "Проф. Цветан Лазаров" 74А
Useful links:
Into Category:
Power Amps. Up To 300 W (4 ohm)
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 0.14 seconds