Search
Current Category
APART/BIAMP
+ Installation Power Amplifiers
Acc. for Mounting Ceiling Speakers - Standard Ceiling Speakers - Water proof Ceiling Speakers 2-Way (HiFi) Ceiling Subwoofers Column Speakers Conference Microphones Control Systems EN 54-24 Certified Loudspeakers Full-Range Passive Loudspeakers Gooseneck Microphones Home/HI-FI AM/FM Tuners Horn Speakers & Sound Projectors Installation & PA Players Installation Housings ETC Installation Mixer Amplifiers Installation Pre-amplifiers In Wall Speakers Isolation Transformer Matrix Mixers Multi-Channel Power Amps. Other Installation Accessories Outdoor Wall Speakers Paging consoles & Microphones Passive Subwoofers Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Small Loudspeakers for Installations Speaker Stands Special Speakers Stereo Amplifiers Surround/Satelite Speakers Transformers for 100 V installations Volume Controls & Program Selectors Wall Speakers
Acc. for Mounting Ceiling Speakers - Standard Ceiling Speakers - Water proof Ceiling Speakers 2-Way (HiFi) Ceiling Subwoofers Column Speakers Conference Microphones Control Systems EN 54-24 Certified Loudspeakers Full-Range Passive Loudspeakers Gooseneck Microphones Home/HI-FI AM/FM Tuners Horn Speakers & Sound Projectors Installation & PA Players Installation Housings ETC Installation Mixer Amplifiers Installation Pre-amplifiers In Wall Speakers Isolation Transformer Matrix Mixers Multi-Channel Power Amps. Other Installation Accessories Outdoor Wall Speakers Paging consoles & Microphones Passive Subwoofers Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Small Loudspeakers for Installations Speaker Stands Special Speakers Stereo Amplifiers Surround/Satelite Speakers Transformers for 100 V installations Volume Controls & Program Selectors Wall Speakers
Category
Manifacturer
Home
» APART/BIAMP
» Installation Power Amplifiers
» REVAMP2060T
APART/BIAMP REVAMP2060T
Features:
Power Amplifier 2x60W / 100V, bridge 120W, class D, 1U, convectional cooling
The new versatile REVAMP2060T is a professional 2-channel digital power amplifier with 2 x 60 watts output power @ 100 volts or @ 4 ohms, that can easily be bridged into a powerful 120 watts @ 100 volts or 8 ohms single amplifier. This Class-D amplifier has a galvanic separated toroidal output transformer built in to avert external influences & disturbances. A fast installation tool on the rear is the clip LED indicator that can be used during the configuration of the input gain. The convection cooled REVAMP2060T has no fan inside which implies that the amplifier works silent and stays dust-free at all times. This maintenance-free feature together with the ease of installation via multiple input and link connection options makes the REVAMP2060T the preferred installer’s choice. The slim 1U design without front control makes the REVAMP2060T a unique all-round amplifier unlike any other in the market.
Specifications:
• Power amp topology: Class-D
• Output channels: 2
• Output power RMS 4 ohms: 2 x 60 watts
• Output power RMS 4 ohms: 2 x 30 watts,
• Output power RMS bridged 8 ohms: 120 watts
• Output power RMS bridged 100V: 120 watts
• Minimum load impedance: 4 ohms; bridged 8 ohms
• Output voltage tappings: 100 - 70 - 50 - 35 volts - 4 ohms
• Line input(s) balanced: 2 Euroblock
• Line input(s) unbalanced: 2 RCA + 2 pass through RCA
• Output connections: Euroblock & SpeakOn
• Frequency Responce: 50 Hz - 20 kHz
• DIP-switchable High Pass Filter - 250Hz
• Cooling system: Convectional
• Dimensions: 483 x 44 x 239 mm (including rack ears), 1HU
• Weight: 5.7 kg
The new versatile REVAMP2060T is a professional 2-channel digital power amplifier with 2 x 60 watts output power @ 100 volts or @ 4 ohms, that can easily be bridged into a powerful 120 watts @ 100 volts or 8 ohms single amplifier. This Class-D amplifier has a galvanic separated toroidal output transformer built in to avert external influences & disturbances. A fast installation tool on the rear is the clip LED indicator that can be used during the configuration of the input gain. The convection cooled REVAMP2060T has no fan inside which implies that the amplifier works silent and stays dust-free at all times. This maintenance-free feature together with the ease of installation via multiple input and link connection options makes the REVAMP2060T the preferred installer’s choice. The slim 1U design without front control makes the REVAMP2060T a unique all-round amplifier unlike any other in the market.
Specifications:
• Power amp topology: Class-D
• Output channels: 2
• Output power RMS 4 ohms: 2 x 60 watts
• Output power RMS 4 ohms: 2 x 30 watts,
• Output power RMS bridged 8 ohms: 120 watts
• Output power RMS bridged 100V: 120 watts
• Minimum load impedance: 4 ohms; bridged 8 ohms
• Output voltage tappings: 100 - 70 - 50 - 35 volts - 4 ohms
• Line input(s) balanced: 2 Euroblock
• Line input(s) unbalanced: 2 RCA + 2 pass through RCA
• Output connections: Euroblock & SpeakOn
• Frequency Responce: 50 Hz - 20 kHz
• DIP-switchable High Pass Filter - 250Hz
• Cooling system: Convectional
• Dimensions: 483 x 44 x 239 mm (including rack ears), 1HU
• Weight: 5.7 kg
Our Price
BUY NOW!
Availability of this item:
In Stock
In Stock
Warranty: 12 months
Продуктът е наличен в
• София, Централен склад бул. "Проф. Цветан Лазаров" 74А
Useful links:
Into Category:
Power Amps. Up To 300 W (4 ohm)
Installation Power Amplifiers
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 0.18 seconds