Search
Current Category
Beyerdynamic
Boundary Microphones Broadcast Microphones Camcorder mics Components for Sennheiser Wireless Condenser Microphones DJ Headphones Dynamic Microphones Gooseneck Microphones Headphone Cables Headphones Earpads Headphones for Drummers HiFi Headphones Intercom Headsets Lavalier Microphones Microphones for Toms Microphones for Toms Mics. for Clarinets Mics. for Saxophone Small-diaphragm Microphones Studio Headphones Wireless Mics. with Handheld Microphone Лентови микрофони
Boundary Microphones Broadcast Microphones Camcorder mics Components for Sennheiser Wireless Condenser Microphones DJ Headphones Dynamic Microphones Gooseneck Microphones Headphone Cables Headphones Earpads Headphones for Drummers HiFi Headphones Intercom Headsets Lavalier Microphones Microphones for Toms Microphones for Toms Mics. for Clarinets Mics. for Saxophone Small-diaphragm Microphones Studio Headphones Wireless Mics. with Handheld Microphone Лентови микрофони
Category
Manifacturer
Home
» Beyerdynamic
» C 562 CM
AKG C 562 CM
Features:
Small, low-profile boundary layer microphone
Wide frequency range
High sensitivity
Ideal for inconspicuous installation in a room
Suited for surveillance or recording
The C 562 CM flush-mount boundary microphone uses the same transducer as the C 562 BL. The C 562 CM has been designed specifically for permanent, "invisible" mounting in ceilings, walls, tables, stage props, etc.
Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording since a single microphone can cover an entire room. The supplied XLR phantom power adapter connects to the microphone cable through a miniature connector so installation holes can be smaller than the diameter of the phantom power adapter.
Polar pattern omnidirectional (hemispherical)
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 130 dB (k=1 %)
Equivalent noise level 16 dB-A
Signal/noise ratio (A-weighted) 78 dB
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN/IEC
Powering <2 mA
Connector 3-pin XLR
Cable 0.5 m
Finish matte nickel plated
Net weight 30 g
Shipping weight 195 g
Included:
- Installation hardware
- Phantom power adapter
Wide frequency range
High sensitivity
Ideal for inconspicuous installation in a room
Suited for surveillance or recording
The C 562 CM flush-mount boundary microphone uses the same transducer as the C 562 BL. The C 562 CM has been designed specifically for permanent, "invisible" mounting in ceilings, walls, tables, stage props, etc.
Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording since a single microphone can cover an entire room. The supplied XLR phantom power adapter connects to the microphone cable through a miniature connector so installation holes can be smaller than the diameter of the phantom power adapter.
Polar pattern omnidirectional (hemispherical)
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 130 dB (k=1 %)
Equivalent noise level 16 dB-A
Signal/noise ratio (A-weighted) 78 dB
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN/IEC
Powering <2 mA
Connector 3-pin XLR
Cable 0.5 m
Finish matte nickel plated
Net weight 30 g
Shipping weight 195 g
Included:
- Installation hardware
- Phantom power adapter
Our Price
521.03 BGN
BUY NOW!
Availability of this item:
on request
on request
Warranty: 12 months
Useful links:
Into Category:
Boundary Microphones
Availability info:
- In stock
- 2 - 5 days
- Limited Qty. Available
- Not available *
- Discontinued
* On request
Help Desk
Advisers
OPERATOR:
"Music World” Ltd
VAT № BG 205686014
7, Iskarsko Chausee blvd.
1528, Sofia, Bulgaria,
info@musicworld.bg
Page generated in 0.19 seconds