Features:
Microphone Set for Drums
TM-DRUMS is a set of four microphones tailored for getting a good drum sound with ease using a Tascam multi-track recorder or audio interface with DAW software. Especially designed for beginners who cannot afford separate mics for each and every part of the drum kit, this mic set meets the minimum requirements for multi-microphone recordings and can even be handled by people who are not yet so familiar with creating a good sounding mix with many sources.
TM-50DB Bass Drum Microphone Specifications:
• Working Principle: Dynamic
• Directivity Pattern: Unidirectional (Cardioid)
• Frequency Response: 50 Hz – 15 kHz
• Output Impedance: 400 Ohms, ±30 % (1 kHz)
• Load Impedance: <1 kOhm
• Sensitivity: –55 dB, ±3 dB (0 dB = 1 V/Pa at 1 kHz)
• Connector: 3-Pin XLR, Male
• External Dimensions (H x W x D): 118 x 59 x 115
• Weight: 460 g (Mic Body Only)
• 5/8-Inch to 3/8-Inch Screw Adapter Included
TM-50DS Snare Drum Microphone Specifications:
• Working Principle: Dynamic
• Directivity Pattern: Unidirectional (Cardioid)
• Frequency Response: 50 Hz – 14 kHz
• Output Impedance: 350 Ohms, ±30 % (1 kHz)
• Load Impedance: <1 kOhm
• Sensitivity: –56 dB, ±3 dB (0 dB = 1 V/Pa at 1 kHz)
• Connector: 3-Pin XLR, Male
• External Dimensions (H x W x D), mm: 105 x 43 x 98
• Weight: 330 g (Mic Body Only)
• 5/8-Inch to 3/8-Inch Screw Adapter Included
TM-50C Overhead/Cymbals Microphone Specifications:
• Working Principle: Condenser (16-mm Diaphragm)
• Phantom Power Required: DC 48 V
• Directivity Pattern: Unidirectional (Cardioid)
• Frequency Response: 30 Hz – 18 kHz
• Output Impedance: 100 Ohms, ±30 % (1 kHz)
• Load Impedance: <1 kOhm
• Sensitivity: –38 dB, ±3 dB (0 dB = 1 V/Pa at 1 kHz)
• Connector: 3-Pin XLR, Male
• External Dimensions (D x L), mm: 21 x 117
• Weight: 85 g (Mic Body Only)
• 5/8-Inch to 3/8-Inch Screw Adapter Included