Features:
ROAMEO Access Point
The RTS ROAMEO System is an integrated digital wireless communications system consisting of beltpacks and access points communicating of DECT (Digital Enahanced Cordless Telecommunications) wireless technology; while communication between the access points and the Matrix uses OMNEO technology, the Dante-based platform for high-quality audio over IP.
DECT is a license-free, globally-accepted standard for wireless communication.
Features:
• Uninterrupted, high-quality and license-free audio
• Fully integrated solution
• Seamless roaming across wide areas
• User-friendly operation
Technical Specifications:
• Audio Modes: G.722 Wideband, G.726 Narrowband
• Max. Beltpacks per AP-1800 (G.722): 5 (Recommended 4 max.)
• Max. Beltpacks per AP-1800 (G.726): 10 (Recommended 8 max.)
• Connectivity: Standard 100Base-T or GigE Ethernet
• Protocol Running on Ethernet: OMNEO
• Ethernet Cabling Required: UTP CAT-5e or Better
• Power Supply Type: External DC, Wall Wart
• Power Supply Input: 100–240 VAC, 50–60 Hz, 0.6A
• Power Supply Output: 12VDC @ 1.5A, Positive Center
• Operating Temperature: 0°C – 50°C
• Ethernet Connectors: . 2 x Standard RJ-45 Jacks
• Optical Connector: Small Form Factor Pluggable SMP
• RF Connectors: Reverse-SMA-F
• Frequency Range: 1880 MHz -1900 MHz
• Communication Protocol: DECT
• Carrier Frequency Selection: Automatic
• Modulation: GFSK
• Maximum Output Power (Peak): 200mW
Antenna:
• Frequency: 1850 MHz -1990 MHz
• Gain: 3dBi
• Horizontal Beam Width: 360°
• Impedance: 50 Ohms
• Max. Power: 50W
• VSWR: <2:1
• Polarization: Linear - Along Length of Antenna
• Connector: Reverse Polarity SMA Plug
AP-1800 Certifications:
• RoHS, FCC Part 15D, FCC Part 15B, FCC/IC Class B device, IC RSS-213, IC ICES-003, CE, EN 301 406, EN 301 489-6, EN 60950-1, RCM, Singapore, Mexico