Текуща категория
APART/BIAMP + Multi-Channel Power Amps.
AM/FM/DAB Tuners Ceiling Subwoofers Control Systems EN 54-24 Високоговорители Full-Range пасивни колони Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Surround/Satelite Speakers Аксесоари за монтаж Атенюатори и селектори на програми Аудио матрици Високоговорители за монтаж в стена Високоговорители за стена Влагозащитени високоговорители за вграждане Влагозащитени стенни високоговорители Двулентови високоговорители за вграждане Други акесоари за 100V инсталации Звукови колони Инсталационни колони Конферентни микрофони Корпуси за високоговорители Микрофони "гъша шия" Микрофонни пултове Пасивни субвуфери Плейъри за инсталация и PA Предусилватели Разделителни трансформатори Рупорни и прожекторни високоговорители Специални високоговорители Стандартни високоговорители за вграждане Стерео Hi-Fi усилватели Стойки за озвучителни тела Трансформатори за 100V инсталации Усилватели на мощност Усилватели със смесител
Производител
ADJ
AKG
BMS
CES
CME
D&R
DNH
EMG
ESP
GHS
GLP
IFF
iSK
JBL
Jem
KEF
KRK
LP
MXR
QSC
RCF
TOA
UB+
UDG
VDB
APART/BIAMP REVAMP4240T
Описание:
Power Amplifier 4x240W 35/50/75/100V, 2x480W bridge 4Ohm 70/100V, class D


REVAMP4240T is a professional 4-channel digital power amplifiers with 4x240 watt output power @ 100 volt or @ 4 Ohms.
The unit is also bridgeable to 2x480 watts @ 100 volt (or 8 ohms). The unit incorporates a high reliability European designed Hypex amplification and power supply technology, outputs with efficient Class D output topology and output transformers.
The very intuitive front display of this amplifier shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound.
REVAMP4240T is the ideal amplifier for applications with 4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated when needed in order to make sure the amplifier itself remains silent as much as possible and avoids the need of regular maintenance.
In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter.

Specifications:
• Power amp topology: Class-D
• Output channels: 4
• Output power RMS 4 ohms: 4 x 240 watts; bridged 8 ohms: 2 x 480 watts
• Sine wave capability: 500ms at full RMS output power
• Minimum load impedance: 4 ohms; bridged: 8 ohms
• Output power RMS 100 volts: 4 x 240 watts;
• Output power RMS 100 volts bridged: 2 x 480 watts
• Line input(s) balanced: 4 Euroblock
• Line input(s) unbalanced: 4 RCA + 4 pass through RCA
• Input sensitivity: 0 dBV / 1 Vrms
• Output connections: Euroblock
• S/N ratio: > 101 dB @ Full power, A-weighted
• Channel separation: > 68 dB @ Full power, 1kHz
• Cooling system: Convectional and temperature controlled fan
• Dimensions: 483 x 88 x 332 mm (including rack ears) 2HU
• Weight: 16.7 kg
Цена
Купи
Наличност:
На склад

Гаранция: 12 месеца

бр.

Продуктът е наличен в
• София, Централен склад
бул. "Проф. Цветан Лазаров" 74А
Полезна информация:
В категории:
Power Amps. Up To 800 W (4 ohm)
Multi-Channel Power Amps.
Installation Power Amplifiers