Текуща категория
APART/BIAMP + Multi-Channel Power Amps.
AM/FM/DAB Tuners Ceiling Subwoofers Control Systems EN 54-24 Високоговорители Full-Range пасивни колони Power Amps. Up To 300 W (4 ohm) Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Surround/Satelite Speakers Аксесоари за монтаж Атенюатори и селектори на програми Аудио матрици Високоговорители за монтаж в стена Високоговорители за стена Влагозащитени високоговорители за вграждане Влагозащитени стенни високоговорители Двулентови високоговорители за вграждане Други акесоари за 100V инсталации Звукови колони Инсталационни колони Конферентни микрофони Корпуси за високоговорители Микрофони "гъша шия" Микрофонни пултове Пасивни субвуфери Плейъри за инсталация и PA Предусилватели Разделителни трансформатори Рупорни и прожекторни високоговорители Специални високоговорители Стандартни високоговорители за вграждане Стерео Hi-Fi усилватели Стойки за озвучителни тела Трансформатори за 100V инсталации Усилватели на мощност Усилватели със смесител
Производител
ADJ
AKG
BMS
CES
CME
D&R
DNH
EMG
ESP
GHS
GLP
IFF
iSK
JBL
Jem
KEF
KRK
LP
MXR
QSC
RCF
TOA
UB+
UDG
VDB
APART/BIAMP REVAMP1680
Описание:
Power Amplifier 16x80W 4Ohm, bridge 8x160W 8Ohm, class D


REVAMP1680 is a professional 16-channel digital power amplifier with 16 x 80 watts output power @ 4 ohms, but the unit is also bridgeable to 8 x 160 watts @ 8 ohms. This 3 rack units high amplifier with very high channel separation also has a dual analog power supply with toroidal power transformers. The standby power consumption is very low, less than 0.5 watts!

Another smart feature of the REVAMP1680 is the switching mode standby power supply with multiple auto power on/off options. You can power on or power off the unit via a trigger input, audio sense... The trigger input will switch on the power amplifier upon AC or DC trigger signal coming from your audio or control system. The amplifier will be switched on as long as the trigger voltage is present. Alternatively, you can set the power on mode switch to the audio trig position: the amp will automatically switch on when a sufficiently strong audio signal is present at the input and automatically switch off after several minutes of silence.

This amplifier is equipped with 2 stereo bus inputs with pass through. These bus inputs are ideal when you want to hear the same audio signal in different output zones with the advantages you need less audio cables and the installation can be done very fast.

Specifications:
• Power amp topology: Class-D
• Output channels: 16
• Output power RMS 4 ohms: 16 x 80 watts
• Output power RMS bridged 8 ohms: 8 x 160 watts
• Minimum load impedance: 4 ohms
• Minimum load impedance bridged: 8 ohms
• Line input(s) unbalanced: 16 RCA + 2 stereo buses RCA + 2 stereo buses outputs RCA
• Input sensitivity: -6 dBV / 0,5 Vrms
• Output connections: Euroblock
• S/N ratio: > 98 dB @ Full power, A-weighted
• Frequency Response 20 Hz – 30 kHz
• Channel separation: > 68 dB @ Full power, 1kHz
• Cooling system: Convectional
• Dimensions 483 x 132 x 411 ( including rack ears), 3HU
• Net weight: 21.7 kg
Цена
Купи
Наличност:
По заявка

Гаранция: 12 месеца

бр.

Полезна информация:
В категории:
Power Amps. Up To 800 W (4 ohm)
Multi-Channel Power Amps.