Текуща категория
APART/BIAMP + Power Amps. Up To 300 W (4 ohm)
AM/FM/DAB Tuners Ceiling Subwoofers Control Systems EN 54-24 Високоговорители Full-Range пасивни колони Multi-Channel Power Amps. Power Amps. Up To 800 W (4 ohm) Power Amps. with DSP Controller Surround/Satelite Speakers Аксесоари за монтаж Атенюатори и селектори на програми Аудио матрици Високоговорители за монтаж в стена Високоговорители за стена Влагозащитени високоговорители за вграждане Влагозащитени стенни високоговорители Двулентови високоговорители за вграждане Други акесоари за 100V инсталации Звукови колони Инсталационни колони Конферентни микрофони Корпуси за високоговорители Микрофони "гъша шия" Микрофонни пултове Пасивни субвуфери Плейъри за инсталация и PA Предусилватели Разделителни трансформатори Рупорни и прожекторни високоговорители Специални високоговорители Стандартни високоговорители за вграждане Стерео Hi-Fi усилватели Стойки за озвучителни тела Трансформатори за 100V инсталации Усилватели на мощност Усилватели със смесител
Производител
ADJ
AKG
BMS
CES
CME
D&R
DNH
EMG
ESP
GHS
GLP
IFF
iSK
JBL
Jem
KEF
KRK
LP
MXR
QSC
RCF
TOA
UB+
UDG
VDB
APART/BIAMP PA2240BP
Описание:
Power amplifier 2x240W 100V


The Apart PA2240BP is a bridgeable and fully equipped 2 channel 100 Volt power amplifier. Without a doubt this amplifier is extremely versatile and can be used in all your big 100 Volt projects.

The amplifier can be used as a double channel amplifier of 2 x 240 Watts in 100 Volt or it can be bridged into a 1 x 480 Watt power amplifier in 100 Volt. Both channels have a program and priority input with independent gain control. The priority input can be activated by contact closure and as soon as this contact is closed, 24V output power becomes available (e.g. can be used to switch the relay of a volume control). Both channels of the amplifier have bass and treble tone control.
The PA2240BP operates on 230V AC and 24V DC, what makes him excel other power amplifiers. In this way the unit can easily be used in evacuation systems compliant to the EN60849 regulation.
As all the controls of the PA2240BP are located at the back pannel, changes of the amplifier's settings by unauthorised or unqualified people will most likely be prevented.
As reliability is extremely important in the install and conrtactor audio market, our R&D department has spent a lot of time on this issue. The use of quality components and the built in dynamic limiter at -3dB certainly contributes to increased reliability.

Specifications:

Input : Program : Balanced Euroblock, 0 dB -10k - Adjustable volume by trimmer
Input : Priority : Balanced Euroblock, 0 dB - 10k - Adjustable volume by trimmer
Output : Loudspeaker output : channel 1 & 2: 4Ohm - 50V - 70V - 100V
Output : Priority output : 2 x 24V, activated by contact closure (Max 0.6A)

Output power RMS Rated : 2 x 240 watt or 1 x 480 watt (bridged mode)

Tone control : Bass : 100 Hz: +10 dB / -14 dB
Tone control : Treble : 10 kHz: +10 dB / -14 dB

Frequency response : 35 Hz - 22 kHz
Signal to Noise ratio : > 95 dB
Total Harmonic Distortion : < 0.5%
Dimensions (H x W x D) : 88 x 430 x 412 mm (Detachable 19” brackets included)
Цена
Купи
Наличност:
На склад

Гаранция: 12 месеца

бр.

Продуктът е наличен в
• София, Централен склад
бул. "Проф. Цветан Лазаров" 74А
Полезна информация:
В категории:
Power Amps. Up To 300 W (4 ohm)
Installation Power Amplifiers